Nitrogen fertiliser options for 2019

Date published: 05 February 2019

While urea is the cheapest option per kg of N, it can suffer from losses in the field due to ammonia volatilisation.

Using a field tray test to check calibration in a fertiliser sower

Stabilised urea, also known as treated or protected urea, containing additives such as NBPT, has been shown to reduce ammonia volatilisation losses compared to urea by 78.5% on average, whilst maintaining comparable yields to Calcium Ammonium Nitrate (CAN), (AFBI & Teagasc research 2017).

Whilst losses of ammonia from CAN are lower than urea, CAN is vulnerable to loss of nitrogen by one of the most potent greenhouse gases - nitrous oxide (N2O), and in wet years by nitrate leaching. For spring dressings stabilised urea will release much less ammonia than straight urea, have significantly lower N2O emissions than CAN, yet produce reliable yields.

Remember it is essential to change the settings on your fertiliser spreader when switching between products to achieve an appropriate bout width to maximise fertiliser efficiency. Urea is less dense and prill size is 3-5mm, compared to CAN at 5-7mm. Check that discs and vanes are free of mud and in good condition. A tray calibration test can confirm the evenness of fertiliser spread and allow for adjustments.

Notes to editors: 

  1. The department may take photographs and videos at announcements and events to publicise its work. Photographs, interviews, videos or other recordings may be issued to media organisations for publicity purposes or used in promotional material, including in publications, newspapers, magazines, other print media, on television, radio and electronic media (including social media and the internet). Photographs and videos will also be stored on the department’s internal records management system. The department will keep the photographs and recordings for no longer than is necessary for the purposes for which they have been obtained. The department’s Privacy Policy is available on our website.
  2. Follow DAERA on Twitter and Facebook.
  3. All media enquiries to DAERA Press Office or tel: 028 9052 4619.

Share this page

Back to top